Add an iSCSI Storage

On the main menu of ZStack Cloud, choose Resource Center > Hardware > Storage Facility > iSCSI Storage. On the iSCSI Storage page, click Add iSCSI Storage. Then, the Add iSCSI Storage page is displayed.

On the displayed page, set the following parameters:
  • Name: Enter the name of the iSCSI storage.

    The name must be 1 to 128 characters in length and can contain Chinese characters, English letters, digits, hyphens (-), underscores (_), periods (.), parenthesis (), colons (:), and plus signs (+).

  • IP Address: Set the IP address of the iSCSI storage.
  • Port: Set the port of the iSCSI storage. Default port: 3260.
  • Cluster: Optional. Select a cluster. You can also attach a cluster after you add the iSCSI storage.
  • CHAP Username: Optional. Enter the CHAP username if the iSCSI storage has CHAP authentication configured.
  • CHAP Password: Optional. Enter the CHAP password if the iSCSI storage has CHAP authentication configured.
Figure 1. Add iSCSI Storage